Rear Door Molle | For Toyota 4Runner | 5th Gen | 3D Printed ASA Interior Storage Organizer | Tactical Gear Mount | Fits 2010-2024 |

$24.98
Color:
Side:
So, you’ve dialed in your 5th Gen 4Runner. The suspension is perfect, the tires are aggressive, and you’ve got enough gear to survive a zombie apocalypse. Your truck is a monument to rugged preparedness.

Then you open a rear door to grab something.

And you’re met with… nothing. A vast expanse of textured plastic. Below it, a door pocket that has become a black hole for crumpled receipts, half-empty water bottles, and fossilized french fries.

It’s an organizational failure on an otherwise flawless machine.

We saw this pathetic waste of space and knew it needed a purpose. So we designed the Rear Door Molle specifically for your rear doors.

This isn't some hobby-grade piece of plastic. We build this from industrial-grade ASA, which means it won’t warp, melt, or become a brittle mess when your truck's interior hits temperatures that could melt lead. It’s engineered to withstand the UV rays that degrade and destroy lesser plastics.

Forget those heavy, overpriced aluminum panels that will inevitably corrode. Our Rear Door Molle is incredibly lightweight and completely rust-proof. You get all the tactical advantage with none of the pointless weight.

Installation is almost too easy. If you can handle a screwdriver, you’ve got this. Line up the panel, and use the 4 included screws for a permanent, secure mount. Done. Just don’t go crazy and overtighten them.

In an instant, that useless panel becomes a highly functional mounting grid. Attach your med kit, a flashlight, or your comms—all of it right where you can reach it. Silent, secure, and ready. You’ll finally have the organized, efficient setup you’ve been posting about online.

You can continue to let that space go to waste, or you can make it one of the most useful spots in your truck.

The choice is yours.



What You Actually Get:

(1) 3D Printed Rear Door Molle Panel, forged from superior ASA

(4) Screws for permanent mounting



Compatibility:

Fits 5th Gen Toyota 4Runner rear doors (2010-2024)

Works with your collection of MOLLE pouches and gear

Mounting Holes: 16x32mm

size: approx 7"x4.5"

--------------------------------------
IMPORTANT INSTALLATION NOTE

When you install the panel in the correct position (position it exactly as the photos show), the screws should not make contact with any wiring. For total peace of mind, you can pop the door panel off for the installation. However, it is not necessary if you follow the positioning. The choice is yours.
--------------------------------------


*(Disclaimer: KodiakForged is not liable for installation or damage & is not affiliated with Toyota. If we were, your door would have been designed this way from the factory. The truck, flashlights, and cool-guy pouches are not included.)
So, you’ve dialed in your 5th Gen 4Runner. The suspension is perfect, the tires are aggressive, and you’ve got enough gear to survive a zombie apocalypse. Your truck is a monument to rugged preparedness.

Then you open a rear door to grab something.

And you’re met with… nothing. A vast expanse of textured plastic. Below it, a door pocket that has become a black hole for crumpled receipts, half-empty water bottles, and fossilized french fries.

It’s an organizational failure on an otherwise flawless machine.

We saw this pathetic waste of space and knew it needed a purpose. So we designed the Rear Door Molle specifically for your rear doors.

This isn't some hobby-grade piece of plastic. We build this from industrial-grade ASA, which means it won’t warp, melt, or become a brittle mess when your truck's interior hits temperatures that could melt lead. It’s engineered to withstand the UV rays that degrade and destroy lesser plastics.

Forget those heavy, overpriced aluminum panels that will inevitably corrode. Our Rear Door Molle is incredibly lightweight and completely rust-proof. You get all the tactical advantage with none of the pointless weight.

Installation is almost too easy. If you can handle a screwdriver, you’ve got this. Line up the panel, and use the 4 included screws for a permanent, secure mount. Done. Just don’t go crazy and overtighten them.

In an instant, that useless panel becomes a highly functional mounting grid. Attach your med kit, a flashlight, or your comms—all of it right where you can reach it. Silent, secure, and ready. You’ll finally have the organized, efficient setup you’ve been posting about online.

You can continue to let that space go to waste, or you can make it one of the most useful spots in your truck.

The choice is yours.



What You Actually Get:

(1) 3D Printed Rear Door Molle Panel, forged from superior ASA

(4) Screws for permanent mounting



Compatibility:

Fits 5th Gen Toyota 4Runner rear doors (2010-2024)

Works with your collection of MOLLE pouches and gear

Mounting Holes: 16x32mm

size: approx 7"x4.5"

--------------------------------------
IMPORTANT INSTALLATION NOTE

When you install the panel in the correct position (position it exactly as the photos show), the screws should not make contact with any wiring. For total peace of mind, you can pop the door panel off for the installation. However, it is not necessary if you follow the positioning. The choice is yours.
--------------------------------------


*(Disclaimer: KodiakForged is not liable for installation or damage & is not affiliated with Toyota. If we were, your door would have been designed this way from the factory. The truck, flashlights, and cool-guy pouches are not included.)